Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Abstract

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation reaction. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of composites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.

• Previous article in issue
• Next article in issue

Keywords
Al-PTFE
Granular composites
Mesoscale simulation
Dynamic response
Force chains

Description